DK380C4.0-H8: Specs, Installation & Performance

In the rapidly evolving landscape of industrial automation, the DK380C4.0-H8 emerges as a significant advancement, combining precision engineering with enhanced operational efficiency. This model represents a leap forward in automation technology, offering robust performance capabilities tailored to meet the demands of modern manufacturing processes.

Key Design Features and Components

The DK380C4.0-H8 is engineered with advanced elements that enhance its operational capabilities. Its modular construction facilitates efficient maintenance while maintaining optimal performance standards.

Internal Architecture

The internal framework of the DK380C4.0-H8 features a dual-layer reinforced steel chassis with integrated cooling channels. The primary components include:

• Precision-Machined Drive Shaft Assemblies: Equipped with ceramic bearings to ensure durability and smooth operation.

• Dual-Zone Thermal Management System: Incorporates independent cooling circuits to maintain optimal operating temperatures.

• High-Density Electronic Control Modules: Positioned in vibration-isolated compartments to minimize interference and enhance reliability.

• Reinforced Power Distribution Network: Designed with surge protection to safeguard against electrical anomalies.

• Automated Lubrication System: Features 12 distribution points to ensure consistent maintenance of moving parts.

Component Specifications:

Source: Stileloot – DK380C4.0-H8 Model Size Guide

Installation Requirements and Space Considerations

Proper installation of the DK380C4.0-H8 is crucial for optimal performance. The process integrates precise dimensional considerations with safety protocols to ensure proper functionality.

Minimum Area Requirements

The DK380C4.0-H8 requires a minimum floor space of 600mm x 700mm for basic installation. This footprint accommodates:

• Base Mounting Plate: 450mm x 550mm

• Power Distribution Unit: 150mm x 200mm

• Primary Control Interface: 100mm x 150mm

• Auxiliary Component Zone: 200mm x 250mm

Component Dimensions:

Clearance Requirements:

• Front Access: 800mm minimum clearance

• Rear Ventilation: 400mm unobstructed space

• Side Access Panels: 500mm on each side

• Overhead Clearance: 750mm from top surface

• Cable Routing Space: 200mm dedicated pathway

• Heat Dissipation Zone: 300mm perimeter gap

Source: Sit Us Internet – DK380C4.0-H8 Model Size Guide

Installation and Configuration Tips

Hardware Setup

The installation of the DK380C4.0-H8 requires proper mounting on a standard 35mm DIN rail within a controlled environment cabinet. Key steps include:

• Power Connection: Connect the 24V DC power supply to terminals 1 (+) and 2 (-) using 14 AWG wire for optimal performance.

• Ventilation: Ensure adequate ventilation with 50mm clearance on all sides to prevent overheating.

Network Configuration

To integrate the DK380C4.0-H8 into a networked environment:

1. Set the Primary IP Address using the rotary switches:

   • Switches 1-3: Define the Network ID (001-254).

   • Switch 4: Set the Subnet Mask (0-7).

   • Default Gateway: Typically set to 192.168.1.1.

2. Configure Ethernet Ports:

   • Port 1: Assigned to the Control Network.

   • Port 2: Assigned to the Device Network.

   • MTU Size: Set to 1500 bytes.

   • Auto-Negotiation: Enabled to allow automatic configuration.

Initial Programming Setup

To program the DK380C4.0-H8:

1. Install the DK380 Configuration Suite v4.0 or higher on a compatible computer.

2. Connect to the Device via the USB programming port.

3. Set System Parameters:

   • Process Cycle Time: 100μs.

   • Memory Allocation: 2MB for user applications and 2MB for system processes.

   • Watchdog Timer: Set to 500ms to monitor system health.

   • Real-Time Clock Synchronization: Enable NTP to maintain accurate timekeeping.

I/O Configuration

The DK380C4.0-H8 supports various input/output configurations:

I/O Specifications:

Communication Protocol Settings

The DK380C4.0-H8 supports multiple communication protocols:

1. Modbus TCP Configuration:

   • Port: 502.

   • Maximum Connections: 32.

   • Timeout: 1000ms.

   • Register Mapping: 4x/3x series.

2. EtherCAT Settings:

   • Cycle Time: 250μs.

   • PDO Mapping: Dynamic.

   • Sync Mode: DC enabled.

   • Distributed Clocks: Active.

Source: Seguridad Blanca – DK380C4.0-H8: Advanced Industrial Automation System

Performance Relative to Size

The DK380C4.0-H8 demonstrates significant dimensional improvements compared to both predecessor and competitor models in the industrial machinery sector. See More